mxcory/Roller-Shade-Controller
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Adjust default values

Browse Source
This commit is contained in:
mrcory
2020-02-14 17:47:10 -05:00
parent c23bd85850
commit 6e99955d11
1 changed files with 17 additions and 17 deletions
Download Patch File Download Diff File Expand all files Collapse all files
shade_controller/config.h
+17 -17
View File
@@ -16,8 +16,8 @@
* stepperSpeed[0] is upward speed
* stepperSpeed[1] is downward speed
*/
float stepperSpeed[2] = {1100.0,1100.0}; //Max Speed
float stepperAccel = 175.0; //Acceleration Rate
float stepperSpeed[2] = {1000.0,1000.0}; //Max Speed
float stepperAccel = 175.0; //Acceleration Rate
/* Drive motor selection.
* You have choice between 2 style motors.
@@ -43,8 +43,8 @@ float stepperAccel = 175.0; //Acceleration Rate
*/
bool invertMotor[2] = {false};
int connectTimeout = 100; // How many attempts can we make before giving up on Blynk
#define blynkRtcInterval = 30; // How often to sync the time. (Would be used for timers)
int connectTimeout = 100; // How many attempts can we make before giving up on Blynk
#define blynkRtcInterval = 30; // How often to sync the time. (Would be used for timers)
#include "blynk.h" //Contains Blynk login
@@ -80,11 +80,11 @@ const int eepromSize = 512;
* values set above, this can be set larger.
*/
#define buttonMargin 30
#define buttonDebounce 3 //Debounce for buttons. Lower causes faster trigger.
#define buttonDebounce 3 //Debounce for buttons. Lower causes faster trigger.
#define ANALOGBUTTONS_SAMPLING_INTERVAL 10
//Feedback for button presses
#define ledPin D3 //Feedback LED
#define ledPin D3 //Feedback LED
/* This will allow control of an accessory light via
* PWM or FastLED.
@@ -93,31 +93,31 @@ const int eepromSize = 512;
* power consumption and add a safety margin.
*/
#define alternateFunction false //Enable alternate use of the reset button
#define lightMode 0 //0-PWM 1-FastLED | PWM is currently not implemented.
#define lightMode 0 //0-PWM 1-FastLED
/* Light accessory settings (Not the feedback LED)
* Using FastLED to run some WS2812
* The data pin for the WS2812 is set in the main ino
* around line 31
*/
int ledBrightness = 0; //Starting brightness
int ledButtonBrightness = 50; //Brightness to use when using rst button to turn on light.
int pulseMax = 250; //Max brightness for pulse mode. Max 250 or it will loop to near 0
//Can be set in Blynk
int ledBrightness = 0; //Starting brightness
int ledButtonBrightness = 300; //Brightness to use when using rst button to turn on light.
int pulseMax = 250; //Max brightness for pulse mode. Max 250 or it will loop to near 0
//Can be set in Blynk
//FastLED Settings
#define NUM_LEDS 9 //Number of attached LEDs
#define DATA_PIN D1 //Communication pin for the LEDs | Same pin will be used for either LED control
#define LED_TYPE WS2812 //LED controller
#define COLOR_ORDER GRB //Order to send colors
#define NUM_LEDS 9 //Number of attached LEDs
#define DATA_PIN D1 //Communication pin for the LEDs | Same pin will be used for either LED control
#define LED_TYPE WS2812 //LED controller
#define COLOR_ORDER GRB //Order to send colors
//PWM Light Settings
#define PWM_PIN D2 //Rev.0 PCB uses D2
#define PWM_PIN D2 //Rev.0 PCB uses D2
//Extra Stuff
#define rtcBlynk false
#define cmds true //After setting up positions, cmdArduino can be disabled
#define cmds true //After setting up positions, cmdArduino can be disabled
//ArduinoOTA
#define myHostname "Shade"